Recently added

School of Engineering & Engineering Technology (SEET): Recent submissions

  • WATER POVERTY INDEX OF SOME SELECTED LOCAL GOVERNMENT AREAS OF EKITI STATE, NIGERIA 
    RODIYA, AFOLABI ADENIYI (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2009-02)
    The water poverty index of some selected local government areas in Ekiti State was investigated to identify and evaluate a tool for assessing poverty in relation to water resource availability. Two approaches: the Composite ...
  • OPTIMUM DESIGN OF A FOUR-CYLINDER INTERNAL COMBUSTION ENGINE CRANKSHAFT 
    DADA, AYODEJI SUNDAY (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2000-01)
    The scarcity and need for efficiency in today’s competitive world have forced engineers to show greater interest in economical and better designs. This project is based on the analysis for optimum design of a four-cylinder ...
  • OPTIMIZING AUTO-REPAIR PRACTICE THROUGH MECHANIC VILLAGE AKURE METROPOLIS AS A CASE STUDY 
    AKINYEMI, ADEMOLA ABIODUN (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2006-09)
    This study investigates the problems facing automobile technicians with a view to optimising questionnaire auto repair work. The data for the study were collected using and interview techniques. One hundred and twenty (120) ...
  • OPTIMIZATION OF ENERGY REQUIREMENTS IN COCOA BEANS PROCESSING PLANT IN NIGERIA: ILE-OLUJI COCOA PRODUCTS COMPANY AS A CASE STUDY 
    AIKHOYE, IKHUOKHIO GODSON (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 1999-12)
    In this study, energy savings in a cocoa processing factory was found to be dependent on various factors which include monitoring and auditing of total energy usage and steam consumed. As a result, tests were carried out ...
  • MODELLING OUTPUT AND DEMAND CHANGES IN MANUFACTURING INDUSTRIES WITH TECHNOLOGY AND INFORMATION CONSTRAINTS 
    ODION, Edmund Osayande (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2010-08)
    The importance of information and modem technology to an organization cannot be over emphasized. This work is aimed at developing a model that can be useful in ascertaining when output will meet demand at any particular ...
  • INVESTIGATION OF BRIQUETTE OF DIFFERENT SPECIES OF WOOD SAWDUST AS SOLID FUEL 
    ADEKUNLE, JOSHUA OYEBODE (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2004-09)
    Investigation of briquettes of different species of wood sawdust as solid fuel was carried out. Briquettes of sawdust species of Teak, Masonia, lroko, Afara and Common Sawdust (mixture of difference species of wood) were ...
  • IMPROVED DESIGN OF WATER DISTRIBUTION SYSTEM FOR ONDO STATE SPECIALIST HOSPITAL AKURE 
    FILANI, CHARLES OLAJIDE (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2004-07)
    Water is one of the most important natural providence for the continuity of life. The groundwater stored in aquifers of the earth crust within the Ondo State Specialist Hospital Akure was explored and exploited by drilling ...
  • FACTORS AFFECTING COMFORT LEVEL OF BUILDINGS IN LAGOS STATE 
    OLOKO, GANIYU ADEKUNLE (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2004-10)
    The problem of natural cooling of buildings in tropical climate has been considered in this research. Two locations Ebute Metta of Lagos Mainland and Ikorodu zones were chosen for the research where the ambient and room ...
  • EVALUATION OF SOME PHYSICAL AND MECHANICAL PROPERTIES OF SELECTED WALLING MATERIALS 
    HARUNA, Ibrahim Olusegun (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2006-09)
    Current high cost of conventional walling materials, the desire for reasonable thermal comfort and problems involved in the analysis of heating and cooling systems call for the search for alternative walling materials. In ...
  • EVALUATION OF COMPOSITE SAWDUST BRIQUETTE AS A HIGH GRADE FUEL FOR DOMESTIC COOKING 
    KUTI, OLAWOLE ABIOLA (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2003-08)
    Evaluation of Composite Sawdust Briquette as a high-grade fuel for domestic cooking is discussed in this write-up. Composite sawdust briquettes were produced by mixing sawdust and palm kernel shell of sizes 1.18mm, 2.00mm ...
  • ENVIRONMENTAL IMPACT ASSESSMENT AND MANAGEMENT NIGERIAN NATIONAL PETROLEUM CORPORATION (NNPC) MEGA STATIONN AWKA, NIGERIA 
    OLAJIDE, AKINWUMI S. (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2010-05)
    In this work, the Environmental Impact Assessment and Management of NigerIan National Petroleum Corporation (NNPC) Mega station, Awka, Nigeria was carried out. The method adopted involved collection of Baseline Information, ...
  • DEVELOPMENT OF THERMOELECTRIC REFRIGERATOR 
    IBIKUNLE, ROTIMI ADEDAYO (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2011-01)
    This research was aimed at developing a thermoelectric refrigerator. This thermoelectric refrigeration is with the aim of encouraging a local and indigenous thermoelectric industry and to ameliorate the harmful effect of ...
  • DEVELOPMENT OF SYSTEMS AND AUXILIARY EQUIPMENT FOR IMPROVED RELIABILITY OF USED TYRES 
    DAFE, TIMOTHY SIVWENOJ (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2004-11)
    The standardisation of tyre, its safety and maintenance cannot be over emphasized. How reliable are second-hand tyres and their possibility that they will not fail in use, and how efficient are the quality of work done by ...
  • DEVELOPMENT OF SOFTWARE FOR SPUR GEAR DESIGN 
    AWE, OLUWASEYI BABATUNDE (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2007-02)
    Due to technology advancement from the Industrial Revolution to the present day, the need for closer control over the accuracy, creation, modification, analysis, optimization, storing and communication of design information ...
  • DEVELOPMENT OF SOFTWARE FOR EVALUATING CAPACITY BUILD- UP OF A MACHINE TOOL INDUSTRY. 
    OLANIYAN, OLAWALE OLUDARE (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2007-02)
    In the conventional manufacturing cycle practiced for so many years in industry, engineering drawings were prepared by design draftsmen and then used by engineers to develop the process plan. The activities involved in ...
  • DEVELOPMENT OF REFRACTORY BRICKS FROM LOCAL RAW MATERIALS 
    OLUNLADE, BANKOLE ADEOYE (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, ONDO STATE, NIGERIA, 2006-02)
    Aluminosilicate refractory bricks for lining melting furnaces were produced from kaolin. Raw kaolin was processed and refined to remove impurities that may lower the refractoriness of the bricks. Part of this was thereafter ...
  • DEVELOPMENT OF RECUPERATORS FOR ROTARY FURNACES 
    OYELAMI, ADEKUNLETAOFEEK (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE ONDO STATE, NIGERIA, 2006-02)
    The design of a radiation-recuperator incorporated in rotary furnace has been undertaken in this study. It was observed that an appreciable percentage of the heat input into the furnace is being lost to the surrounding, ...
  • DEVELOPMENT OF APROTOTYPE INCUBATOR FOR POULTRY BIRDS 
    PETER, OSASONA AJA YI (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE ONDO STATE, NIGERIA, 2006-06)
    The design and fabrication of prototype incubator has been carried out. Basically, it was made to comprise two chambers viz, the egg chamber and the heat pump. The other part is the control panel which regulates the ...
  • Development of Polyurethane Batch Foaming Plant for Small and Medium Foam Production 
    Onamade, Akinola O (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, ONDO STATE, NIGERIA, 2006-06)
    Batch foaming machine is a set of equipment arranged in an effective and efficient way for the production of foams. This necessitates a carefully controlled reaction to obtain foam of desired and consistent quality. The ...
  • DEVELOPMENT OF A MATERIAL REQUIREMENTS PLANNING (MRP) SOFTWARE FOR JOBSHOPS 
    AKINTUNLAJI, OLUSOLA AKINBOLAJI (FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE ONDO STATE, NIGERIA, 2004-08)
    The development of a Material Requirements Planning (MRP) software for jobshops is presented in this write-up. The software aims to help in managing materials requirements in job shops by providing weekly reports of orders ...

Search FUTAspace


Advanced Search

Browse

My Account