FUTAspace Home
→
School of Engineering & Engineering Technology (SEET)
→
Recent submissions

School of Engineering & Engineering Technology (SEET): Recent submissions

Now showing items 281-299 of 795

DETERMINATION OF THE EFFECTS OF DISTRIBUTED GENERATION (DG) ON FEDERAL UNIVERSITY OF TECHNOLOGY (FUTA) 33/11 kV NETWORK

EJIGA, JOSEPH (The federal university of technology,Akure., 2021-07)

In this research, the Federal University of Technology Akure 33/11 kV Injection Substation Network has been considered under the presence of a distributed generation (DG). The transformer and line data such as phase ...
DEEP LEARNING APPLICATION IN TRAFFIC SIGNS RECOGNITION AND DETECTION IN NIGERIA

BADMUS, SODIQ ADEDIGBA (The federal university of technology,Akure., 2021-09)

Mobility is an element that is highly related to the development of society and the quality of individual life. The increase in demand for automobile production and traffic infrastructure construction, advanced countries ...
DEVELOPMENT OF AN IMAGE-BASED DETECTION OF MAIZE LEAF DISEASES USING CONVOLUTIONAL NEURAL NETWORK

ADEYEYE, OMOGBEMINIYI ABIMBOLA (The federal university of technology,Akure., 2021-09)

The area of agricultural information, automatic identification and classification of maize leaf diseases are highly desired and sought-after. One of the major problems facing the agricultural industry as a whole is the ...
DEVELOPMENT AND PERFORMANCE EVALUATION OF YAM FLOUR MILLING MACHINE

ODIGHI, CLETUS JUDE (The federal university of technology,Akure., 2021-05)

Conventional method of processing yam flour is ineffective and time-consuming and this leads to low output. Automated operated yam milling machine was designed and fabricated using simulated Engineering principles from ...
EVALUATION OF EVAPOTRANSPIRATION AND FRUIT YIELD OF TOMATO (SOLANIUM ESCULENTUM) UNDER AMBIENT AND CONTROLLED ENVIRONMENTS

JEGEDE, OLABODE ANTHONY (The federal university of technology,Akure., 2021-10)

Greenhouse cultivation of crops, especially vegetable crops is gaining wide acceptance in most tropical countries but the set back is the adoption of te technology, lack of information about the water needs of crops. Hence, ...
CLIMATE CHANGE IMPACT ASSESSMENT AND INTERCOMPARISON ON STREAMFLOW IN THREE WEST AFRICAN RIVER BASINS

BABALOLA, TOJU ESTHER (The federal university of technology,Akure., 2021-11)

The harsh effects of a changing climate will be experienced more by the developing countries in Africa because of their inadequate adaptation capacity. To offer accurate results for stakeholders, Climate change impacts on ...
ENVIRONMENTAL IMPACT ASSESSMENT OF ABATTOIR WASTES ON PHYSICOCHEMICAL AND MICROBIOLOGICAL CHARACTERISTICS OF WATER BODIES IN ORE, ONDO STATE

ASAMU, AUGUSTINE IFEOLUWAPOSIMI (The federal university of technology,Akure., 2021-02)
EFFECTS OF PARTIAL REPLACEMENT OF PORTLAND CEMENT WITH FLY ASH ON THE STRENGTH AND DURABILITY CHARACTERISTICS OF CONCRETE

YUSUFF, TIRIMISIYU ABIODUN (The federal university of technology,Akure., 2021-06)

The high cost and environmental damage resulting from cement production, such as the emission of carbon dioxide (CO2) into the atmosphere, has led to the search for alternative binders that are friendly and also contribute ...
DEVELOPMENT OF A RECONFIGURABLE PLATFORM FOR A MICROSATELLITE PRODUCTION

SOBOWALE, Adeniyi A. (The federal university of technology,Akure., 2018-02)

The process of satellite assemblage, integration and testing is challenging and requires considerable care. Hence, the provision of a support platform which provides easier mechanical mounting and decoupling within a design ...
DEVELOPMENT OF A DUAL - PURPOSE WHEELCHAIR FOR PARAPLEGICS USING NIGERIAN ANTHROPOMETRY DATA

ORISAWAYI, ABIMBOLA OLUWATAYO (The federal university of technology,Akure., 2017-08)

Due to the numerous numbers of paraplegics in Nigeria, people with this condition need a dual-purpose wheelchair in their daily activities. Thus, a dual-purpose wheelchair developed with the aim of facilitating mobility ...
DEVELOPMENT OF A DIAGNOSTIC SCHEDULE FOR LC-195V5 COMPUTER NUMERICAL CONTROL (CNC) MILLING MACHINE

AGBOOLA, OLUWOLE OLAYINKA (The federal university of technology,Akure., 2014-05)

For the use of Computer Numerical Control CNC machine tools is more and more extensive, its fault diagnosis research is becoming more essential. Failure forms are diversified, and fault reasons are very complicated. It ...
DEVELOPMENT OF A WIRELESS TRANSMISSION SYSTEM FOR ECG SIGNALS USING IEEE802.15.4/ZIGBEE PROTOCOL

OLONIBUA, AYODELE ABIODUN (The federal university of technology,Akure., 2014-11)

Long time encountered by patients in the hospitals sometimes could be frustrating and dangerous in the case of emergency which is as a result of the process involved in data acquisition and transmission to the doctors for ...
POST-PRIVATIZATION STATUS OF NIGERIA’S ELECTRIC POWER SYSTEM: A CASE STUDY OF AKURE 33kV DISTRIBUTION NETWORK

MADU, FRANKLIN CHIBUEZE (The federal university of technology,Akure., 1999-05)

This research presents a study on the operating status of Akure 33kV distribution network system. The study aimed at evaluating the impact of the Electric Power Sector Reform Programme on the performance of Akure 33kV ...
ON-LINE CONDITION MONITORING OF SQUIRREL CAGE INDUCTION MOTOR USING CURRENT SIGNATURE ANALYSIS

AYOADE, MORUFU ADEWALE (The federal university of technology,Akure., 2010-04)

This research involves the use of Motor current signature analysis (MCSA) to detect and diagnose induction motor faults. MCSA uses line current spectrum of electromechanical energy conversion system for locating faults ...
PERFORMANCE EVALUATION OF SPACE-TIME TRELLIS CODES WITH SINGLE-CARRIER FREQUENCY DOMAIN EQUALIZATION (SC-FDE) IN RAYLEIGH FADING CHANNEL

ADEBANJO, IBUKUNOLUWA ADETUTU (The federal university of technology,Akure., 2016-04)

Multipath fading and intersymbol interference are inherent characteristics of wireless communication. Multipath fading occurs when transmitted signals arrive at the receiver at marginally different times, while Intersymbol ...
INDICES OF TRAFFIC CONGESTION ON MAJOR ROADS IN AKURE, NIGERIA

LAOYE, ABDULRAHMAN ADEWALE (The federal university of technology,Akure., 2015-12)

Indices of traffic congestion on major roads in Akure, Nigeria were determined. The routes considered were Oyemekun-Oba Adesida, Arakale and Ondo roads based on the fact that they were major routes critical to movement of ...
DEVELOPMENT OF A PULSE PLANTER FOR CONSERVATION AGRICULTURE

OSADARE, TEMITOPE (The federal university of technology,Akure., 2016-07)

Conservation agriculture is based on optimizing yields and profits, to achieve a balance of agricultural economic and environmental benefits. It is the integration of ecological management with modern scientific agricultural ...
DESIGN, FABRICATION AND EVALUATION OF A LOW COST SEED PLANTER FOR SMALL HOLDER FARMERS

OLAJIDE, Omotayo Gabriel (The federal university of technology,Akure., 2014-08)

A manually-operated row crop seed planter was designed and fabricated to determine its performance. The planter was designed based on the planting concepts and ergonomic requirement of the operators. It was fabricated using ...
ENVIRONMENTAL IMPACT OF SILICA SAND EXCAVATION IN BADAGRY AREA, LAGOS STATE, NIGERIA

ORIMOLOYE, Omowole Peter (The federal university of technology,Akure., 2014-07)

The study investigates environmental impact of silica sand excavation in Badagry area, Lagos Nigeria as it affects the excavation activities in the area of interest. The chemical properties of silica sand sample in the ...

Now showing items 281-299 of 795

Search FUTAspace

Advanced Search

Browse

All of FUTAspace
This Community
- By Issue Date
- Authors
- Titles
- Subjects

Recently added

School of Engineering & Engineering Technology (SEET): Recent submissions

Search FUTAspace

Browse

All of FUTAspace

This Community

My Account