Recently added

Master's/Ph.D Thesis: Recent submissions

  • DEVELOPMENT OF A MATERIAL REQUIREMENTS PLANNING (MRP) SOFTWARE FOR JOBSHOPS 
    AKINTUNLAJI, OLUSOl,A AKINBOLAJI (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2004-08)
    The development of a Material Requirements Planning (MRP) software for jobshops is presented in this write-up. The software aims to help in managing materials requirements in job shops by providing weekly reports of orders ...
  • DEVELOPMENT OF A ROTARY FURNACE FOR COTTAGE FOUNDRIES 
    AKINSIPE, TAIWO ELIZABETH (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2008-07)
    A 20 kg Rotary Furnace was designed and fabricated for application at the cottage industry level. The capacity which is considerably smaller than the industrial type (100 kg and above) fucilitated economic application ...
  • DEVELOPMENT OF AN EMPIRICAL MODEL FOR JOBSHOP FLOW TIME AND DUE-DATE PREDICTION 
    AKINNULI, OLUFEMI BASIL (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 1998-08)
    .A computer software was developed and tested for validation for jobshop flowtime and due date prediction. The software utilises data from shop floor which are analysed to predict expected waiting time on each individual ...
  • DEVELOPMENT OF AN ELECTRO- MECHANICAL SP'EED LIMITING DEVICE FOR AUTOMOBILES 
    AKANJI, SAMUEL ADEOYE (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2007-10)
    Ovcrspccding has become a problem to our motorists because they want to reach their destination on time. forgetting that it is better to be late than be the late, This, project discusses the solution to the problem of ...
  • SPEED CONTROL AND ARDUINO BASED ACCELEROMETER DATA ACQUISITION UNIT DEVELOPMENT FOR LABORATORY VIBRATING TABLE APPLICATION. 
    OMOTOYINBO, TIMILEHIN ADEKUNLE (The federal University of Technology, Akure, 2021-11)
    Speed control system and an Arduino based accelerometer real-time data acquisition system has been developed and applied to a surface vibrating table unit for laboratory applications. The speed control unit employs the use ...
  • PRODUCTION AND EVALUATION OF BIODIESEL FROM MARULA (Sclerocarya 
    ABDULKADIR, MUYIDEEN (The federal University of Technology, Akure, 2022-02)
    Reducing dependence on fossil fuel, environmental pollution and depletion of fossil oil well stimulated active researchers’ interest to look for an alternative. Biodiesel from sclerocarya birrea (marula oil) is one of many ...
  • DEVELOPMENT OF THERMOELECTRIC REFRIGERATOR 
    IBIKUNLE, ROTIMI ADEDAYO (Fed. University of Tech. Akure., 2011-01)
    This research was aimed at developing a thermoelectric refrigerator. This thermoelectric refrigeration is with the aim of encouraging a local and indigenous thermoelectric industry and to ameliorate the harmful effect ...
  • EVALUATION OF SOME PHYSICAL AND MECHANICAL PROPERTIES OF SELECTED WALLING MATERIALS 
    HARUNA, Ibrahim Olusegun (Fed. University of Tech. Akure., 2006-09)
    Current high cost of conventional walling materials, the desire for reasonable thermal comfort and problems involved in the analysis of heating and cooling systems call for the search lor alternative walling properti ...
  • DEVELOPMENT OF AN INDIGENOUS, BENCH-TOP MANUAL TORSION TESTING MACHINE 
    GHAZALI, AKEEM (Fed. University of Tech. Akure., 2010-12)
    The increasing enrollment of students in higher institutions of learning in Nigeria demands higher capital expenditures, which either in some cases are not available or grossly insufficient, to provide essential machines ...
  • DEVELOPMENT OF SYSTEMS AND AUXILIARY EQUIPMENT FOR IMPROVED RELIABILITY OF USEDTYRES 
    DAFE, TIMOTHY SIVWENOJA (Fed. University of Tech. Akure., 2004-11)
    The standardisation of tyre, its safety and maintenance cannot be over emphasized. How reliable are second-hand tyres and their possibility that they will not fail in use, and how efficient are the quality of work done ...
  • OPTIMUM DESIGN OF A FOUR-CYLINDER INTERNAL COMBUSTION ENGINE CRANKSHAFT 
    DADA, AYODEJI SUNDAY (Fed. University of Tech. Akure., 2000-01)
    he scarcity and world have competitive interest in economical This project analyses worked forced stressing, using a high-duty into optimal bending cast function is the volume and torsional It which can ...
  • INVESTIGATION OF BRIQUETTE OF DIFFERENT SPECIES OF WOOD SAWDUST AS SOLID FUEL 
    ADEKUNLE, JOSHUA OYEBODE (Fed. University of Tech. Akure., 2004-09)
    Investigation of briquettes of different species of wood sawdust as solid fuel was carried out. Briquettes of sawdust species of Teak, Masonia, lroko, Afara and Common Sawdust (mixture of difference species of wood) ...
  • TECHNOLOGY FACTOR IN WASTE MANAGEMENT IN LAGOS METROPOLIS 
    PELEMO, JOSIAH (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2005-10)
    This study assessed the technological factor in urban solid waste management system in Lagos metropolis. This study utilized mostly data through the use of structured questionnaires. The questionnaires were designed in ...
  • DEVELOPMENT OF RECUPERATORS FOR ROTARY FURNACES 
    OYELAMI, ADEKUNLE TAOFEEK (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2006-02)
    The design of a radiation-recuperator incorporated in rotary furnace has been undertaken in this study. It was observed that an appreciable percentage of the heat input into the furnace is being lost to the surrounding, ...
  • DEVELOPMENT OF A PROTOTYPE INCUBATOR FOR POULTRY BIRDS 
    OSASONA, AJA YI PETER (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2006-06)
    The design and fabrication of prototype incubator has been carried out. Basically, it was made to comprise two chambers VIZ, the egg chamber and the heat pump. The other part is the control panel which regulates the ...
  • DEVELOPMENT OF AN ELECTRO-HYD'RAULICALL Y OPERATED SCISSORS-TYPE LIFT PLATFORM 
    ONIPEDE, MOSES AWOLEYE IBIKUNLE (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2005-12)
    A multi purpose scissors type Electro-hydraulically operated Lift platform has been designed and fabricated using locally available materials. The structural members consist of frames, scissors arms, push blocks, which ...
  • DEVELOPMENT OF COMPUTERIZED TECHNICAL DRAWING LEARNING DESK FOR SECONDARY SCHOOL&. 
    OMOTOSO, OLUFIROPO ABlYE (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2006-06)
    The study involves the development of a technical drawing software package called T.D. BASICS for the teaching and learning of technical drawing at secondary school level. A modular approach was adopted using the computer ...
  • DEVELOPMENT OF REFRACTORY BRICKS FROM LOCAL RAW MATERIALS 
    OLUNLADE, BANKOLE ADEOYE (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2006-02)
    Aluminosilicate refractory bricks for lining melting furnaces were produced from kaolin. Raw kaolin was processed and refined to remove impurities that may lower the refractoriness of the bricks. Part of this was thereafter ...
  • FACTORS AFFECTING COMFORT LEVEL OF BUILDINGS IN LAGOS STATE 
    OLOKO, GANIYU ADEKUNLE. (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2004-10)
    The problem of natural cooling of buildings in tropical climate has been considered in this research. Two locations Ebute Metta of Lagos Mainland and Ikorodu zones were chosen for the research where the ambient and room ...
  • DEVELOPMENT OF SOFT\VARE FOR EVALUATING CAPACITY BUILD - UP OF A MACHINE TOOL INDUSTRY 
    OLANIYAN, OLAWALE OLUDARE (FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, 2000-02)
    In the conventional manufacturing cycle practiced for so many years in industry, engineering drawings were prepared by design draftsmen and then used by manufacturing engineers to develop the process plan. The activities ...

Search FUTAspace


Advanced Search

Browse

My Account